Skip to content

Garment Manufacturing MOQ: What Drives Minimums and How to Work with Them

Why garment factories set minimum order quantities, how MOQs are counted per style, color and size, and practical ways to work with lower quantities without surprises.

Updated
Updated 18 Nov 2026
Reading time
10 min read
Tall stack of neatly folded olive-green fabric pieces

A garment factory's minimum order quantity (MOQ) is the smallest order it will accept for a style, a color or a whole order at the quoted price. MOQs are rarely arbitrary. They reflect the minimum batches of fabric mills and dye houses, the cost of setting up a sewing line and the minimums of trim suppliers. Knowing which of these constraints sets a particular MOQ is the key to working with it.

This guide explains how MOQs are counted, why they vary so much between products and fabrics, and which levers buyers can use to order smaller quantities. Any figures here are illustrative only. Real minimums depend on the factory, the mill, the fabric and the season, and are confirmed in the quotation.

Key takeaways

  • MOQ is usually set by fabric and dyeing minimums first, then by line set-up and trim minimums.
  • Always ask whether an MOQ is per order, per style, per color or per size; the same number means very different things.
  • Stock and greige-based fabrics generally allow lower minimums than custom mill-made fabrics, yarn-dyes or custom prints.
  • Fewer colors, fabric shared across styles and factory-developed (ODM) bases are reliable ways to reduce quantities.
  • Below-MOQ orders are often possible with a surcharge; compare it with the cost of buying and holding extra stock.

What MOQ means and why factories set it

MOQ is how a factory makes sure an order covers costs it cannot avoid. Every new style needs pattern work, marker making, line set-up, sampling and administration, whether the order is a few hundred pieces or tens of thousands. Upstream, mills and trim suppliers have their own minimum runs, and the factory must buy at least that much regardless of how many garments you order.

That is why one factory can quote different MOQs for two styles. A T-shirt in a stock color of a common single jersey can often run in smaller quantities than a garment in a custom-dyed, mill-developed fabric with branded zippers and a specialty wash. In effect, the MOQ is the highest of all the upstream minimums, converted into garments.

MOQ is also tied to price. Many factories quote a price at a given quantity and a higher price below it rather than refusing smaller orders. Treat the MOQ in a quotation as the start of a conversation about cost, not a fixed rule.

The constraints behind most garment MOQs

Most MOQs trace back to one or more of five constraints. Ask the factory which one is binding for your style.

Fabric minimums per color
Knitting and weaving mills run fabric in minimum quantities per quality and color, usually stated in kilograms for knits and meters or yards for wovens. If your order uses less, someone pays for the leftover.
Dyeing lots
Fabric is dyed in batches sized to the dyeing machine. A small batch in a large machine wastes water, energy and chemicals, so dye houses set minimum lots or charge extra. Each color also needs its own lab dip and shade approval.
Line set-up and efficiency
A sewing line needs time to balance operations and reach target output on a new style. On very short runs the line may finish before it reaches normal efficiency, which raises the effective cost per piece.
Trim minimums
Custom woven labels, printed care labels, hangtags, branded buttons, zipper pullers and printed polybags have supplier minimums. Dyed-to-match zippers and thread can carry their own.
Decoration and wash set-up
Screen printing needs screens and color separations, embroidery needs digitizing and garment washes need recipe development. These fixed costs are spread over the order quantity.

MOQ per style, per color, per size or per order

The first question about any MOQ is what it is counted against. Two factories quoting the same headline number can be offering very different flexibility.

MOQ basisWhat it usually meansQuestion to ask
Per orderTotal pieces across all styles and colors in one purchase order.Is there also a minimum per style or color inside the order?
Per styleTotal pieces of one design across all its colors and sizes.How many colors can that quantity be split into?
Per color (per style)Pieces of one style in one color across all sizes; usually driven by fabric and dye lots.Can colors sharing a fabric be combined to reach the fabric minimum?
Per fabric or dye lotFabric quantity in one quality and color, which may be shared across several styles.Does the minimum apply to the combined fabric use of all styles in that fabric and color?
Per sizeRarely a hard minimum; factories usually accept a size curve, though tiny quantities in extreme sizes can affect efficiency.Is there a minimum per size, and how are odd sizes packed?

Worked example: turning a fabric minimum into a garment MOQ

A simple calculation shows why fabric usually sets the floor. The numbers below are hypothetical and chosen only to illustrate the method.

Suppose a knit mill's minimum for a custom-dyed jersey is 500 kg per color, and the factory's marker shows fabric consumption of 0.25 kg per T-shirt including cutting waste. Dividing the fabric minimum by consumption per piece gives the number of garments needed to use that fabric:

500 kg ÷ 0.25 kg per piece = 2,000 pieces per color

If your order is 600 pieces in that color, about 1,400 pieces' worth of fabric would be left over. The factory will price that surplus into your order, look for another order using the same fabric and color, or propose an alternative such as a stock fabric. The same logic applies to wovens in meters and to custom trims.

Once you know whether fabric, dyeing, trims or line set-up is binding, you can target the right lever instead of negotiating the headline number.

How MOQs tend to differ by product type

MOQs vary by product because each category has different upstream constraints. The comparison is qualitative and indicative; individual factories and fabrics can sit well outside these patterns.

Indicative and qualitative only. Factory MOQs are confirmed in each quotation.
Product typeMain MOQ driversRelative flexibility
T-shirts and polosFabric per color, dye lots, custom collars and cuffs for polosOften relatively flexible, especially in stock colors
Hoodies and sweatshirtsFleece or French terry minimums, matching rib, custom drawcordsModerate; matching rib in each color adds a minimum
Denim and jeansDenim mill minimums, wash development, branded hardwareLower for custom denim; mill stock denim helps
Woven shirts and blousesYarn-dyed or printed fabric minimums, buttons, labelsSolid stock fabrics are more flexible than yarn-dyes or prints
Sweaters and flat knitwearYarn minimums per color, machine set-upDepends on yarn availability; stock yarn colors help
ActivewearPerformance fabrics, often imported, and specialist processesModerate to lower when fabric is developed specifically
Jackets and outerwearShell, lining and padding minimums, many trims, special processesOften lower, given the number of components
Workwear and uniformsDurable twills and canvas, reflective tapes, badges or embroideryRepeat programs with carry-over fabrics can be flexible

Stock, greige-based and custom fabrics: the effect on MOQ

Fabric choice is usually the biggest single lever on MOQ. The further a fabric is from something the mill already makes or holds, the higher the minimum and the longer the lead time. The fabric guide covers how to specify alternatives.

Fabric routeHow it worksEffect on MOQTrade-offs
Mill stock fabricFabric already produced and dyed by the mill in standard colors.Generally the lowest minimums, limited mainly by available stock.Limited color and quality choice; stock may not be available for repeats.
Greige dyed to orderUnfinished fabric held by the mill and dyed in your color on order.Lower than fully custom; the dye lot minimum still applies per color.Construction fixed by what the mill holds in greige.
Custom mill-made fabricFabric knitted or woven to your specification, then dyed and finished.Higher, combining knitting or weaving and dyeing minimums.Full control of yarn, construction and finish; longer lead time.
Yarn-dyes and custom printsYarn dyed before knitting or weaving, or fabric printed with your artwork.Often the highest, because yarn and print set-up are color-specific.Distinctive product, but more lead time and inventory risk.
Imported specialty fabricFabric sourced from mills outside Bangladesh for specific qualities.Set by the overseas mill; freight and import timing add constraints.Access to specialty fabrics; longer, less predictable lead times.

Strategies to work with lower quantities

Successful low-quantity programs usually combine several levers. Each has a cost, typically in choice, price or lead time.

Design around stock or greige fabrics
Choose a quality the mill already holds and develop the product around it, rather than developing a fabric around the product.
Reduce the number of colors
Splitting a fixed quantity into fewer colors brings each color closer to the fabric and dye lot minimum. Launch core colors first and add seasonal colors once sell-through is proven.
Share fabric across styles
Use one fabric and color for several styles, such as a T-shirt, a long-sleeve top and a dress in the same jersey, so the combined consumption meets the fabric minimum.
Start from an ODM base
Many factories have tested patterns and fabrics for common styles. Customizing an existing base can cut development time and minimums. See ODM manufacturing.
Accept a small-quantity surcharge
Factories often accept quantities below MOQ for a per-piece or per-color surcharge. Compare it with the cost of buying, storing and possibly discounting extra units.
Consider garment dyeing
For suitable products, garments sewn in fabric prepared for dyeing (PFD) can be dyed in smaller color batches after sewing. It changes look and shrinkage behavior, so sample carefully.
Use stock trims and simpler branding
Standard buttons, stock zipper colors and printed or heat-transfer neck labels avoid custom trim minimums.
Plan volume across deliveries
A seasonal forecast with fabric booked once and garments delivered in stages can meet fabric minimums while keeping each delivery small. Agree in writing who owns unused fabric.

MOQ drivers and how to negotiate them

Negotiate the constraint, not the number. Once the factory explains which minimum is binding, use the matching lever.

MOQ driverWhy the factory needs itNegotiation lever
Fabric minimum per colorThe mill will not knit, weave or dye below a set quantity.Switch to stock or greige fabric, share fabric across styles, cut colors.
Dye lot sizeSmall lots in large machines waste resources and raise shade risk.Accept a dyeing surcharge, align colors with other orders, or use garment dyeing.
Yarn minimumSpinners and yarn dyers sell yarn in minimum lots per color.Choose stock yarn colors and simplify stripes or color counts.
Line set-up and efficiencyShort runs do not reach target efficiency.Accept a CM surcharge, group similar styles on one line, allow flexible delivery dates.
Custom trimsLabel, button and zipper suppliers set their own minimums.Use stock trims, or pay trim set-up costs and reuse trims across seasons.
Print, embroidery, wash set-upScreens, digitizing and wash recipes are fixed costs.Reduce print colors, consider digital printing for short runs, reuse wash recipes.
PackagingPrinted polybags, boxes and hangtags have printer minimums.Use plain polybags with stickers, or order packaging for several seasons.

Check these points before accepting a below-MOQ order

A lower quantity is only a good deal if the conditions around it are clear. Before confirming, check:

  • Price and surcharges are written into the quotation, per piece, per color or as set-up charges.
  • Fabric surplus: who owns leftover fabric and whether it can be used for your repeat order.
  • Shade continuity: a repeat dyed in a new lot may not match the first; agree shade tolerances and keep approved standards.
  • Line priority: small orders can be scheduled around larger ones, so confirm the delivery date in the T&A calendar.
  • Subcontracting: confirm the order will be made in the approved factory, not moved to an unverified unit.

To test quantities against a real style, request a quote with your tech pack, colors and quantities per color.

Frequently asked questions

What is a typical MOQ for garments made in Bangladesh?

There is no single number. Minimums depend on the product, the fabric route, the number of colors and the factory. Basics in stock or greige-based fabric can usually run lower than programs in custom-developed fabric. Share quantities by style and color and the factory will confirm its minimum in the quotation.

Is MOQ counted per style or per color?

It depends on the factory and the binding constraint. Because fabric is dyed per color, many factories set a minimum per color per style, sometimes alongside an order total. Always ask which basis applies.

Can I mix sizes to reach the MOQ?

Usually yes. Sizes normally sit inside the per-color minimum as a size curve, so you can choose the split. Very small quantities in extreme sizes are generally accepted but may affect packing and efficiency.

Will a lower quantity cost more per piece?

Usually, because fixed costs are spread over fewer units and surcharges may apply. Compare the higher unit price with the cost of capital, storage and markdown risk on extra units before deciding.

How do ODM bases help with MOQ?

An ODM base uses a pattern and often a fabric the factory has already developed, which removes some development cost and lets you build on fabric the factory already buys. Dye lot and trim minimums can still apply. See our private label guide.

Sources and references

Regulations, tariffs and preference schemes change. Always confirm current requirements with the official source or a licensed customs broker.

Related guides

Related products and services

Markets

Ready to source garments from Bangladesh?

Tell us what you need. We review every enquiry personally and reply with next steps, questions or factory options.

Request a Quote